Data monitoring sensor network for bignet research testbed

Equipped with recent advances in electronics and communication, wireless sensor networks gained a rapid development to provide reliable information with higher Quality of Service (QoS) at lower costs. This paper presents a realtime tracking system developed as a part of the ISSNIP BigNet Testbed project. Here a GPS receiver was used to acquire position information of mobile nodes and GSM technology was used as the data communication media. Moreover, Google map based data visualization software was developed to locate the mobile nodes via Internet. This system can be used to accommodate various sensors, such as temperature, pressure, pH etc., and monitor the status of the nodes.

GeoConnect : geographic and connectivity-aware routing protocol for wireless sensor network

Sensor nodes are closely tied with their geographic location and their connectivity. In recent years many routing protocols have been developed to provide efficient strategy. But most of them are either focus on the geographic proximity or on connectivity. However in sparse network, Geographic routing would fail at local dead ends where a node has no neighbour closer to destination. In contrast, connectivity-based routing may result in non-optimal path and overhead management. In this paper we designed a scalable and distributed routing protocol, GeoConnect, which considers geographic proximity and connectivity for choosing next hop. In GeoConnecl, we construct a new naming system that integrates geographic and connectivity information into a node identification. We use dissimilarity function to compute the dissimilarity and apply a distributed routing algorithm to route packets. The experimental results show that GeoConnect routing provides robust and better performance than sole geographic routing or connectivity routing.

Multi-level virtual ring : a foundation network architecture to support peer-to-peer application in wireless sensor network

Two main problems prevent the deployment of peer-to-peer application in a wireless sensor network: the index table, which should be distributed stored rather than uses a central server as the director; the unique node identifier, which cannot use the global addresses. This paper presents a multi-level virtual ring (MVR) structure to solve these two problems.

The index table in MVR is distributed stored by using the DHT technique. MVR is constructed decentralized and runs on mobile nodes themselves, requiring no central server or interruption. Naming system in MVR uses natural names rather than global addresses to identify sensor nodes. The MVR can route directly on the name identifiers of the sensor nodes without being aware the location. Some sensor nodes are selected as the backbone nodes by the backbone selection algorithm and are placed on the different levels of the virtual rings. MVR hashes nodes’ identifiers on the virtual ring, and stores them at the backbone nodes. Furthermore, MVR adopts cross-level routing to improve the routing efficiency.

Experiments using ns2 simulator for up to 200 nodes show that the storage and bandwidth requirements of MVR grow slowly with the size of the network. Furthermore, MVR has demonstrated as self-administrating, fault-tolerant, and resilient under the different workloads.

Multi-level virtual ring : cross-level name routing with embedded identifier in sensor network

This paper presents the Multi-level Virtual Ring (MVR), a new name routing scheme for sensor networks. MVR uses selection algorithm to identify sensor nodes' virtual level and uses Distribution Hash Table (DHT) to map them to the MVR, The address routing performs well in wired network, but it's not true in sensor network. Because when nodes are moving, the address of the nodes must be changed Further, the address routing needs servers to allocate addresses to nodes. To solve this problem, the name routing is being introduced, such as Virtual Ring Routing (VRR). MVR is a new name routing scheme, which improves the routing performance significantly by introducing the multi-level virtual ring and cross-level routing. Experiments show this embedded name routing is workable and achieves better routing performance.

Quality control of sensor network data

A wireless sensor network (WSN) is a group of sensors that are geographically distributed and interconnected by wireless networks. Sensors gather information about the state of physical world. Then, after processing forward them to the main destination. To be able to provide this service, there are many aspects of communication techniques that need to be explored. Supporting quality of service (QoS) will be of critical importance for pervasive WSNs that serve as the network infrastructure of diverse applications. To illustrate new research and development interests in this field, this paper examines and discusses the requirements, critical challenges, and open research issues on QoS management in WSNs. A brief overview of recent progress is given.

Multi-level virtual ring : an architecture for content routing in wireless sensor network

Two main problems prevent the deployment of content delivery in a wireless sensor network: the address, which is widely used in the Internet as the identifier, is meaningless in wireless network, and the routing efficiency is a big concern in wireless sensor network. This paper presents an embedded multi-level ring (MVR) structure to address those two problems. The MVR uses names rather than addresses to identify sensor nodes. The MVR routes packets on the name identifiers without being aware the location. Some sensor nodes are selected as the backbone nodes and are placed on the different levels of the virtual rings. MVR hashes nodes and contents identifiers, and stores them at the backbone nodes. MVR takes the cross-level routing to improve the routing efficiency. Further, MVR is constructed decentralized and runs on the mobile nodes themselves, requiring no central control. Experiments using ns2 simulator for up to 200 nodes show that the storage and bandwidth requirements of MVR grow slowly with the size of the network. Furthermore, MVR has demonstrated as self-administrating, fault-tolerant, and resilient under the different workloads. We also discuss alternative implementation options, and future work.

Hierarchical workflow management in wireless sensor network

To build the service-oriented applications in a wireless sensor network (WSN), the workflow can be utilized to compose a set of atomic services and execute the corresponding pre-designed processes. In general, WSN applications rely closely on the sensor data which are usually inaccurate or even incomplete in the resource-constrained WSN. Then, the erroneous sensor data will affect the execution of atomic services and furthermore the workflows, which form an important part in the bottom-to-up dynamics of WSN applications. In order to alleviate this issue, it is necessary to manage the workflow hierarchically. However, the hierarchical workflow management remains an open and challenging problem. In this paper, by adopting the Bloom filter as an effective connection between the sensor node layer and the upper application layer, a hierarchical workflow management approach is proposed to ensure the QoS of workflow-based WSN application . The case study and experimental evaluations demonstrate the capability of the proposed approach.

Fuzzy logic optimized wireless sensor network routing protocol

Wireless sensor networks (WSNs) are used in health monitoring, tracking and security applications. Such networks transfer data from specific areas to a nominated destination. In the network, each sensor node acts as a routing element for other sensor nodes during the transmission of data. This can increase energy consumption of the sensor node. In this paper, we propose a routing protocol for improving network lifetime and performance. The proposed protocol uses type-2 fuzzy logic to minimize the effects of uncertainty produced by the environmental noise. Simulation results show that the proposed protocol performs better than a recently developed routing protocol in terms of extending network lifetime and saving energy and also reducing data packet lost.

A block-aware hybrid data dissemination with hotspot elimination in wireless sensor network

As a significant milestone in the data dissemination of wireless sensor networks (WSNs), the comb-needle (CN) model was developed to dynamically balance the sensor data pushing and pulling during hybrid data dissemination. Unfortunately, the hybrid push-pull data dissemination strategy may overload some sensor nodes and form the hotspots that consume energy significantly. This usually leads to the collapse of the network at a very early stage. In the past decade, although many energy-aware dynamic data dissemination methods have been proposed to alleviate the hotspots issue, the block characteristic of sensor nodes has been overlooked and how to offload traffic from hot blocks with low energy through long-distance hybrid dissemination remains an open problem. In this paper, we developed a block-aware data dissemination model to balance the inter-block energy and eliminate the spreading of intra-block hotspots. Through the clustering mechanism based on geography and energy, "similar" large-scale sensor nodes can be efficiently grouped into specific blocks to form the global block information (GBI). Based on GBI, the long-distance block-cross hybrid algorithms are further developed by effectively aggregating inter-block and intra-block data disseminations. Extensive experimental results demonstrate the capability and the efficiency of the proposed approach. © 2014 Elsevier Ltd.

A hybrid localization approach in 3D wireless sensor network

Location information acquisition is crucial for many wireless sensor network (WSN) applications. While existing localization approaches mainly focus on 2D plane, the emerging 3D localization brings WSNs closer to reality with much enhanced accuracy. Two types of 3D localization algorithms are mainly used in localization application: the range-based localization and the range-free localization. The range-based localization algorithm has strict requirements on hardware and therefore is costly to implement in practice. The range-free localization algorithm reduces the hardware cost but at the expense of low localization accuracy. On addressing the shortage of both algorithms, in this paper, we develop a novel hybrid localization scheme, which utilizes the range-based attribute RSSI and the range-free attribute hopsize, to achieve accurate yet low-cost 3D localization. As anchor node deployment strategy plays an important role in improving the localization accuracy, an anchor node configuration scheme is also developed in this work by utilizing the MIS (maximal independent set) of a network. With proper anchor node configuration and propagation model selection, using simulations, we show that our proposed algorithm improves the localization accuracy by 38.9% compared with 3D DV-HOP and 52.7% compared with 3D centroid.

Energy-efficiency analysis of cluster-based routing protocols in wireless sensor network

This paper extends the conditions of the cluster-based routing protocols in terms of general algorithm complexity of data fusion, general compressing ratio of data fusion, and network area with long distance. Corresponding three general evaluation methods to evaluate the energy efficiency of the cluster-based routing protocols such as LEACH, PEGASIS, and BCDCP are provided. Moreover, three facts are found in them: (1) High-level software energy macro model is used to compute the energy dissipation of general data fusion software and make the constant value of energy dissipation of 1-bit data fusion an especial instance. (2) Multi-hop energy efficiency is related to the radio hardware parameters and the dynamic topology of network and the above protocols do not exploit the best use of the energy efficiency of multi-hop scheme. (3) High-energy dissipation non-cluster-head nodes, whose number changes with the density of the sensor nodes in clusters, worsen the death of nodes. The numerical results of experiments reprove these discoveries. Furthermore, they provide helpful guide for improving the above routing protocols to extent their application ranges.

Network resilience in low-resource mobile wireless sensor networks

Wireless sensor networks (WSNs) are deployed in numerous mission critical applications in which the network needs to remain active for as long as possible while delivering quality information to a base station. However, WSNs suffer from a wide range of attacks due to their limited processing and energy capabilities. Their resiliency, however, depends on fast recovery from such attacks being achieved. In recent work, the authors developed and implemented clustering, reprogramming and authentication protocols involved in recovering stationary WSNs with low resources. In this paper, we determine the additional resources required in implementing these protocols in a mobile WSN.

We present recovery protocols on TinyOS motes for a low-resourced, mobile deployment. We describe the issues we encountered in the implementation. We present times, RAM and ROM needed to run the recovery protocols and compare these with the stationary case, demonstrating that the additional cost of reprogramming in a mobile WSN is less than 25% of that in a stationary WSN and the additional cost of re-clustering in a mobile WSN is less than 9% of that in a stationary WSN. Authentication has an insignificant cost increase.